KD Scientific Legato 110 Syringe Pump

$1,010.00
Sold Out

This syringe pump was procured from a lab who was downsizing and no longer needed some of their supplies. This pump has been tested, works great, and comes with our 30 day money back guarantee.

Single syringe infuse/withdraw with program option for 2 programs. 50 steps each. Accommodates syringes 0.5 µl to 60 ml. User definable flow rates with selectable target volume or time values to control the total infusion volume.

  • Holds one syringe from 0.5 µl to 60 ml

  • High resolution color touch screen

  • Unparalleled ease of use

  • Touch pad "lock" feature

  • LED light on front panel

  • Full metal chassis

  • Built in syringe table

  • Up to 30 lb/13 kg linear force

  • Advanced microstepping techniques

  • Built in RS485 interface

  • USB port

  • I/O & TTL interface

  • Continuous mode of operation

  • Spill dam

  • Programmable

Accuracy

  • ±0.5%

Syringes (Min/Max)

  • 0.5 µl to 60 ml

Flow Rate

  • Minimum (0.5 µl syringe): 1.28 pl/min

  • Maximum (10 ml syringe): 25.99 ml/min

  • Maximum (60 ml syringe): 88.28 ml/min

Display

  • 4.3 WQVGA TFT Color Display with Touchpad

Non-Volatile Memory

  • Stores all Settings

Connectors

  • RS485 - IEEE-1394 6 pos

  • USB - Type B

  • I/O & TTL - 15 pin D-Sub Connector

Linear Force (Max)

  • 13.6 kg (30 lb) @ 100% Force Selection

Drive Motor

  • 0.9 Stepper Motor

Motor Drive Control

  • Microprocessor with 1/16 microstepping

Number of Microsteps
per one rev.of Lead Screw

  • 15,360

Step Revolution

  • 0.069 µm/step

Step Rate - Minimum

  • 27.5 sec/µstep

Step Rate - Maximum

  • 26 usec/µstep

Pusher Travel Rate - Minimum

  • 0.15 µm/min

Pusher Travel Rate - Maximum

  • 159 mm/min

Power

  • 100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse

Dimensions

  • 22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in)

Weight

  • 2.66 kg (5.9 lb)

Operating Temperature

  • 4 degree C to 40 degree C (40 degree F to 104 degree F)

Storage Temperature

  • -10 degree C to 70 degree C (14 degree F to 158 degree F)

Humidity

  • 20% to 80% RH non condensing

Mode of Operation

  • Continuous

Classification

  • Class 1

Pollution Degree

  • 1

Installation Category

  • 11

Regulatory Certification

  • CE, UL, CSA, CB Scheme, EU RoHS

Add To Cart

This syringe pump was procured from a lab who was downsizing and no longer needed some of their supplies. This pump has been tested, works great, and comes with our 30 day money back guarantee.

Single syringe infuse/withdraw with program option for 2 programs. 50 steps each. Accommodates syringes 0.5 µl to 60 ml. User definable flow rates with selectable target volume or time values to control the total infusion volume.

  • Holds one syringe from 0.5 µl to 60 ml

  • High resolution color touch screen

  • Unparalleled ease of use

  • Touch pad "lock" feature

  • LED light on front panel

  • Full metal chassis

  • Built in syringe table

  • Up to 30 lb/13 kg linear force

  • Advanced microstepping techniques

  • Built in RS485 interface

  • USB port

  • I/O & TTL interface

  • Continuous mode of operation

  • Spill dam

  • Programmable

Accuracy

  • ±0.5%

Syringes (Min/Max)

  • 0.5 µl to 60 ml

Flow Rate

  • Minimum (0.5 µl syringe): 1.28 pl/min

  • Maximum (10 ml syringe): 25.99 ml/min

  • Maximum (60 ml syringe): 88.28 ml/min

Display

  • 4.3 WQVGA TFT Color Display with Touchpad

Non-Volatile Memory

  • Stores all Settings

Connectors

  • RS485 - IEEE-1394 6 pos

  • USB - Type B

  • I/O & TTL - 15 pin D-Sub Connector

Linear Force (Max)

  • 13.6 kg (30 lb) @ 100% Force Selection

Drive Motor

  • 0.9 Stepper Motor

Motor Drive Control

  • Microprocessor with 1/16 microstepping

Number of Microsteps
per one rev.of Lead Screw

  • 15,360

Step Revolution

  • 0.069 µm/step

Step Rate - Minimum

  • 27.5 sec/µstep

Step Rate - Maximum

  • 26 usec/µstep

Pusher Travel Rate - Minimum

  • 0.15 µm/min

Pusher Travel Rate - Maximum

  • 159 mm/min

Power

  • 100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse

Dimensions

  • 22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in)

Weight

  • 2.66 kg (5.9 lb)

Operating Temperature

  • 4 degree C to 40 degree C (40 degree F to 104 degree F)

Storage Temperature

  • -10 degree C to 70 degree C (14 degree F to 158 degree F)

Humidity

  • 20% to 80% RH non condensing

Mode of Operation

  • Continuous

Classification

  • Class 1

Pollution Degree

  • 1

Installation Category

  • 11

Regulatory Certification

  • CE, UL, CSA, CB Scheme, EU RoHS

This syringe pump was procured from a lab who was downsizing and no longer needed some of their supplies. This pump has been tested, works great, and comes with our 30 day money back guarantee.

Single syringe infuse/withdraw with program option for 2 programs. 50 steps each. Accommodates syringes 0.5 µl to 60 ml. User definable flow rates with selectable target volume or time values to control the total infusion volume.

  • Holds one syringe from 0.5 µl to 60 ml

  • High resolution color touch screen

  • Unparalleled ease of use

  • Touch pad "lock" feature

  • LED light on front panel

  • Full metal chassis

  • Built in syringe table

  • Up to 30 lb/13 kg linear force

  • Advanced microstepping techniques

  • Built in RS485 interface

  • USB port

  • I/O & TTL interface

  • Continuous mode of operation

  • Spill dam

  • Programmable

Accuracy

  • ±0.5%

Syringes (Min/Max)

  • 0.5 µl to 60 ml

Flow Rate

  • Minimum (0.5 µl syringe): 1.28 pl/min

  • Maximum (10 ml syringe): 25.99 ml/min

  • Maximum (60 ml syringe): 88.28 ml/min

Display

  • 4.3 WQVGA TFT Color Display with Touchpad

Non-Volatile Memory

  • Stores all Settings

Connectors

  • RS485 - IEEE-1394 6 pos

  • USB - Type B

  • I/O & TTL - 15 pin D-Sub Connector

Linear Force (Max)

  • 13.6 kg (30 lb) @ 100% Force Selection

Drive Motor

  • 0.9 Stepper Motor

Motor Drive Control

  • Microprocessor with 1/16 microstepping

Number of Microsteps
per one rev.of Lead Screw

  • 15,360

Step Revolution

  • 0.069 µm/step

Step Rate - Minimum

  • 27.5 sec/µstep

Step Rate - Maximum

  • 26 usec/µstep

Pusher Travel Rate - Minimum

  • 0.15 µm/min

Pusher Travel Rate - Maximum

  • 159 mm/min

Power

  • 100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse

Dimensions

  • 22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in)

Weight

  • 2.66 kg (5.9 lb)

Operating Temperature

  • 4 degree C to 40 degree C (40 degree F to 104 degree F)

Storage Temperature

  • -10 degree C to 70 degree C (14 degree F to 158 degree F)

Humidity

  • 20% to 80% RH non condensing

Mode of Operation

  • Continuous

Classification

  • Class 1

Pollution Degree

  • 1

Installation Category

  • 11

Regulatory Certification

  • CE, UL, CSA, CB Scheme, EU RoHS

Catalog No. 78-8110

Serial No. 900347

Voltage: 12 - 30 VDC

Wattage: 8 Watts

Link to user manual: https://www.kdscientific.com/media/manuals/KDS%20Legato%20100%20Series_5617-006REV2.0.pdf

Vacuubrand Vacuum Pump ME4
$415.00
Allentown EcoFlo Supply and Exhaust Blower Set
$925.00
Analytik Jena UVP Crosslinker CL-3000 (2021)
$1,050.00
Chemglass Dura-Mag 5 position Stir Plate
$350.00
Invitrogen E-Gel Power Snap, Complete Electrophoresis System w/G8200 Camera
$745.00