Ashcroft GC30 Pressure Transducer - Brand New
GC30 Differential Pressure Transducer
FEATURES
Combination of digital pressure gauge, switch and transducer Simple “push-button” configurability allows user to adjust switch settings, analog scaling Numerous standard ranges available
TYPICAL USES
Filter monitoring Clean room pressure differential Vacuum/Suction pressure sensing & control Fan speed control Alarm and control
KEY BENEFITS
• Ultra-compact design
• User may configure analog output scaling to any range within full scale of sensor range.
PERFORMANCE SPECIFICATIONS
Reference Temperature: 73 °F (23 °C)
Analog Output: 1-5 Vdc
Accuracy: ±1.5% of span
Accuracy linearity, hysteresis and repeatability (URL) Response Time: 50 ms
Output Resolution: 25 mV
Analog Scaling: User may configure analog output scaling to any range within F.S. of sensor range
Pressure Switch Output: Type: NPN/PNP open collector up to 30 Vdc/80 mA
Setting Accuracy: ±1.5% of span (URL)
Number of Contacts: 2
Time Delay: 5 ms-2 sec (selectable)
Hysteresis: Variable deadband (by user)
Switch Setting: User may adjust switch actuation and dead-band to any points within full scale sensor range
Display: Type: 3½ digit, 10 mm
LED Accuracy: ±1.5% of span + last digit (URL)
Display Setting: User may re-configure display scaling, set to capture MIN or MAX value, and adjust display update rate
ENVIRONMENTAL SPECIFICATIONS Temperature Effects: (ref. 73°F (23°C))
Zero/Span:
±0.09%/°F (±0.15%/°C): ±2.5˝ W.C., 0/2.5˝ W.C. and below
±0.06%/°F (±0.10%/°C): ±5.0˝ W.C., 0/5.0˝ W.C. and above
Temperature Limits:
Storage: Operating: Compensated: –22 °F to 140 °F (–30 °C to 60 °C) –4 °F to 140 °F (–20 °C to 60 °C) 14 °F to 122 °F (–10 °C to 50 °C)
Humidity: 0-85% RH, Non-condensing
FUNCTIONAL SPECIFICATIONS Max Static (Line) Pressure: 7.5 psi (50 kPa) Proof: 7.5 psid (50 kPa) Burst: 25 psig (170 kPa) CE Compliance EN61326-1 2006, EN61326-2-3 2006
ELECTRICAL SPECIFICATIONS Power Supply Requirements: Supply Voltage: 11-27 Vdc Current Consumption: 30 mA (Max.) Switch Contacts: (2) NPN or PNP open collector outputs NPN: 30 Vdc / 80 mA (Max.) PNP: Voltage drop 1 Vdc (Max.) / 80 mA (Max.)
GC30 Differential Pressure Transducer
FEATURES
Combination of digital pressure gauge, switch and transducer Simple “push-button” configurability allows user to adjust switch settings, analog scaling Numerous standard ranges available
TYPICAL USES
Filter monitoring Clean room pressure differential Vacuum/Suction pressure sensing & control Fan speed control Alarm and control
KEY BENEFITS
• Ultra-compact design
• User may configure analog output scaling to any range within full scale of sensor range.
PERFORMANCE SPECIFICATIONS
Reference Temperature: 73 °F (23 °C)
Analog Output: 1-5 Vdc
Accuracy: ±1.5% of span
Accuracy linearity, hysteresis and repeatability (URL) Response Time: 50 ms
Output Resolution: 25 mV
Analog Scaling: User may configure analog output scaling to any range within F.S. of sensor range
Pressure Switch Output: Type: NPN/PNP open collector up to 30 Vdc/80 mA
Setting Accuracy: ±1.5% of span (URL)
Number of Contacts: 2
Time Delay: 5 ms-2 sec (selectable)
Hysteresis: Variable deadband (by user)
Switch Setting: User may adjust switch actuation and dead-band to any points within full scale sensor range
Display: Type: 3½ digit, 10 mm
LED Accuracy: ±1.5% of span + last digit (URL)
Display Setting: User may re-configure display scaling, set to capture MIN or MAX value, and adjust display update rate
ENVIRONMENTAL SPECIFICATIONS Temperature Effects: (ref. 73°F (23°C))
Zero/Span:
±0.09%/°F (±0.15%/°C): ±2.5˝ W.C., 0/2.5˝ W.C. and below
±0.06%/°F (±0.10%/°C): ±5.0˝ W.C., 0/5.0˝ W.C. and above
Temperature Limits:
Storage: Operating: Compensated: –22 °F to 140 °F (–30 °C to 60 °C) –4 °F to 140 °F (–20 °C to 60 °C) 14 °F to 122 °F (–10 °C to 50 °C)
Humidity: 0-85% RH, Non-condensing
FUNCTIONAL SPECIFICATIONS Max Static (Line) Pressure: 7.5 psi (50 kPa) Proof: 7.5 psid (50 kPa) Burst: 25 psig (170 kPa) CE Compliance EN61326-1 2006, EN61326-2-3 2006
ELECTRICAL SPECIFICATIONS Power Supply Requirements: Supply Voltage: 11-27 Vdc Current Consumption: 30 mA (Max.) Switch Contacts: (2) NPN or PNP open collector outputs NPN: 30 Vdc / 80 mA (Max.) PNP: Voltage drop 1 Vdc (Max.) / 80 mA (Max.)
GC30 Differential Pressure Transducer
FEATURES
Combination of digital pressure gauge, switch and transducer Simple “push-button” configurability allows user to adjust switch settings, analog scaling Numerous standard ranges available
TYPICAL USES
Filter monitoring Clean room pressure differential Vacuum/Suction pressure sensing & control Fan speed control Alarm and control
KEY BENEFITS
• Ultra-compact design
• User may configure analog output scaling to any range within full scale of sensor range.
PERFORMANCE SPECIFICATIONS
Reference Temperature: 73 °F (23 °C)
Analog Output: 1-5 Vdc
Accuracy: ±1.5% of span
Accuracy linearity, hysteresis and repeatability (URL) Response Time: 50 ms
Output Resolution: 25 mV
Analog Scaling: User may configure analog output scaling to any range within F.S. of sensor range
Pressure Switch Output: Type: NPN/PNP open collector up to 30 Vdc/80 mA
Setting Accuracy: ±1.5% of span (URL)
Number of Contacts: 2
Time Delay: 5 ms-2 sec (selectable)
Hysteresis: Variable deadband (by user)
Switch Setting: User may adjust switch actuation and dead-band to any points within full scale sensor range
Display: Type: 3½ digit, 10 mm
LED Accuracy: ±1.5% of span + last digit (URL)
Display Setting: User may re-configure display scaling, set to capture MIN or MAX value, and adjust display update rate
ENVIRONMENTAL SPECIFICATIONS Temperature Effects: (ref. 73°F (23°C))
Zero/Span:
±0.09%/°F (±0.15%/°C): ±2.5˝ W.C., 0/2.5˝ W.C. and below
±0.06%/°F (±0.10%/°C): ±5.0˝ W.C., 0/5.0˝ W.C. and above
Temperature Limits:
Storage: Operating: Compensated: –22 °F to 140 °F (–30 °C to 60 °C) –4 °F to 140 °F (–20 °C to 60 °C) 14 °F to 122 °F (–10 °C to 50 °C)
Humidity: 0-85% RH, Non-condensing
FUNCTIONAL SPECIFICATIONS Max Static (Line) Pressure: 7.5 psi (50 kPa) Proof: 7.5 psid (50 kPa) Burst: 25 psig (170 kPa) CE Compliance EN61326-1 2006, EN61326-2-3 2006
ELECTRICAL SPECIFICATIONS Power Supply Requirements: Supply Voltage: 11-27 Vdc Current Consumption: 30 mA (Max.) Switch Contacts: (2) NPN or PNP open collector outputs NPN: 30 Vdc / 80 mA (Max.) PNP: Voltage drop 1 Vdc (Max.) / 80 mA (Max.)
